Cast Basalt Lined Pipes & Fittings Manufacturers, Suppliers in India - Perfect Engineering India
We at Perfect Engineering India are
Manufacturing and Supplying a wide range of Cast Basalt Lined Pipes &
Fittings in all over areas of India. We are providing these products to our
esteemed patrons at an affordable rate.
More info: http://www.perfectengineeringindia.in/cast-basalt-and-ceramic.php
Cast Basalt is a mineral of exceptionally high
abrasion resistance, unlimited resistance to moisture, high compressive
strength and resistance to virtually all acids and alkalis and is completely
corrosion free. Cast basalt is produced by melting selected natural basalt
broken into sizes of 20-50 mm in shaft furnaces at temperatures around 1,300C,
following by casting at which the melted basalt forms uniforms pherolithic
crystals hence producing its typical physical properties, in particular its
exceptional hardness and wear-resistance.
Cast basalt reaches a value of hardness of 8(
min ) on the Moh's hardness scale. for comparision : the highest value10is only
attained by dimonds. by virtue of these properties,the silicate cast basalt
provides outstanding protection against abrasion and scrubbing.
However, it is marked by ascertain sensitivity
ti impacts.Under Normal services conditions, cast basalt withstands temperatures
up to approx.+ 350C or-40C. However Cast basalt should not be subjected ti temperature
shocks.
Sizes : Cast basalt produces are manufactured
as tiles, from pieces and segments. straight pipes are spun-cast, available for
nominal bores of 32 to 600 mm with the wall thickness ranging from 20 to 30mm
and a standard lenght of 500mm.samller nominal bores of straight pipes, pipe
segment for radill of 40 to 3,000mm of vatrious angles, as well as special
formpiece linings are pre dominately sand-cast. The standard wall-thickness is
20mm. depending on the respective quantity, steel moulds can also be used, the
wall thickness in those cases usually being 30 to 40mm.
About US:
Establish
in the year 2014 at chakan, Pune, Maharashtra. We perfect Engineering India are
a sole proprietorship based firm, engaged as the for most.
Design, engineering, manufacture, supply and
export of water treatment plants equipment, Rubber lined pipes and equipment,
PP/HDPE lined pipes, PTFE Lined pipes, cast basalt lined pipes, Ceramic, Lined
pipes, FRP pipe and Equipment, Acid/Caustic Dosing Ejectors, Plastic filter
nozzle, PP strainer, Tubular level gauges, HCL Fume absorber, shell and tube
heat exchanger, Pressure vessel and tanks etc. Our products are high in demand
due to their premium, quantity and affordable prices. Furthermore we ensure, to
timely deliver, these products to our clients through this. We have gained a
huge clients base in the markets.
Contact US:
Gat No. 191/2, Bandalwasti,
Kuruli, Taluka - Khed, Chakan,
Pune-410501, Maharashtra
Comments
Post a Comment